PORTO-Träger Keramik PRO

PORTO-adjusting foot Keramik PRO
PORTO-adjusting foot Keramik PRO

PORTO - new carrier for ceramic plates
The Porto leveling feet by Terrassenmeister are growing. The new ceramic PRO and PRO Vario supports are specially designed for use with ceramic tiles.

Advantages:

- optimized stability and handling (foot is one-piece!)
- two adjustment options (via the blue nut or with the adjustment key from above)
- Square bottom part for better corner and wall mounting
- Two side panel brackets integrated on the foot
- four integrated spacers 4 mm
- Rubber pad included




PORTO-Träger Keramik PRO Vario

PORTO-Träger Keramik PRO Vario
PORTO-Träger Keramik PRO Vario

PORTO PRO Vario
This leveling foot is self-leveling up to 5% gradient, so it is suitable for rough terrain. The adjustment is possible by hand or with the key developed for it.

Advantages:
- optimized stability and handling (foot is one-piece!)
- two adjustment options (via the blue nut or with the adjustment key from above)
- Square bottom part for better corner and wall mounting
- Two side panel brackets integrated on the foot
- four integrated spacers 4 mm - Rubber pad included

 





PORTO Positioning Supports for Stone and Ceramic Paving Slabs

PORTO  Positioning Supports for Stone & Ceramic Paving Slabs
PORTO Positioning Supports for Stone & Ceramic Paving Slabs

PORTO – adjustable-position supports for the substructures of stone and ceramic paving slabs
Terrassenmeister-Porto is the ideal load-bearing system for patios constructed with stone or ceramic paving slabs. These plastic supports adapt perfectly to the site and substructure conditions, take up extreme loads and are resistant to weather and environmental influences.

Videos on this and many more ferax products can be found here

 

 

Advantages:
• The large surface area (Ø 20 cm) and the rounded dished bottom prevents the supporting element from being pressed into the substrate or from penetrating sealed areas. The filigree lugs at ground level also guarantee stability on smooth substrate.
• Ground unevenness can be easily balanced out by means of the integrated adjustment system.
• Adjustment even under load-bearing.
• Supporting material is absolutely resistant to water and frost and the substructure is thus effectively insulated and protected. Integrated lugs allow water to run off under control and prevent moisture build-up.
• The load distributors attached at the sides provide perfect spread of central load over the whole area of the positioning foot.

Positioning foot requirement per m² is dependent on the size of the slabs used.



Material:             Polypropylene reinforced with stone dust.
Firmness:            With a central load between 1 and 1.5 tons according to type.

Scope of Applications:
For all stone and ceramic paving slabs. Joint distance apart 3mm. The 3mm rubber plate provides firm laying. No flapping. Extreme comfort under foot.

 

Description

Adjusting Range

Item No.

PU

Euro pallet

Porto Adjuster Foot for stone/ceramic slab

08 – 20 mm

700 993 020

40

1600

Porto Adjuster Foot for stone/ceramic slabs

20 – 30 mm

700 993 030

60

1500

Porto Adjuster Foot for stone/ceramic slabs

40 – 60 mm

700 993 065

35

700

Porto Adjuster Foot for stone/ceramic slabs

50 – 80 mm

700 993 080

25

500

Porto Adjuster Foot for stone/ceramic slabs

80 – 140 mm

700 993 140

15

300

Porto Adjuster Foot for stone/ceramic slabs

140 – 230 mm

700 993 300

10

240

Extension 60mm (from 40-65mm 1 x usable)

extented 60mm

700 998 060

40

800

Extension 10 mm (from 20-30mm 1 x usable)

extented 10mm

700 998 010

60

1500

Connecting Slab 200x200 for walls and corners

-

700 993 200

10

720

Holder for side cladding

-

700 993 201

10

4600

 


PORTO – adjustable positioning foot

Porto – adjustable positioning foot for subfloors of stone and ceramic slabs
Porto – adjustable positioning foot for subfloors of stone and ceramic slabs

PORTO – adjustable positioning foot for subfloors of stone and ceramic slabs
with regulating head, balances out gradients of max. 5%

 

 

 

 

 

Description

Adjustment

Item No.

PU

Euro pallet

Porto – adjustable positioning foot for subfloors of stone and ceramic slabs

55 – 75 mm

700 994 075

25

500

Porto – adjustable positioning foot for subfloors of stone and ceramic slabs

65 – 95 mm

700 994 095

25

500

Porto – adjustable positioning foot for subfloors of stone and ceramic slabs

95 - 155 mm

700 994 155

15

300

Porto – adjustable positioning foot for subfloors of stone and ceramic slabs

155 – 245 mm

700 994 245

10

240